Hi everybody,
My friend and me are quite newbie in the Arduino world, recently we've been tinkering around and after having done the first steps with LED and so on we wanted to try the BLE connectivity. It looked like straight forward but something went wrong on the way.
We have a nano Arduino connected with a BLE module nRF8001, and we have followed the all step indicated at the link:
https://learn.adafruit.com/getting-star ... troduction
We managed with the first part of the tutorial, the callbackEcho example, we could easily send and check the text sent through the official app. After that we wanted to try the Pin I/O options with the StandardFirmata example and somehow the code doesn’t compile with giving back this error message.
Any advice on what we have might missed to do and did wrong ?
Thanks in advance for the help.
J&F
BLE nRF8001 - TOTAL_PORTS error
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
- adafruit_support_mike
- Posts: 67446
- Joined: Thu Feb 11, 2010 2:51 pm
Re: BLE nRF8001 - TOTAL_PORTS error
Hmm.. that looks like something amiss in the Firmata library. Let me check with the folks who maintain that code.
- frenky_red
- Posts: 2
- Joined: Sun Jan 10, 2016 11:57 am
Re: BLE nRF8001 - TOTAL_PORTS error
Thanks!
We thought something was wrong with the library but we don't have enough experience about it and it became quite difficult.
We will wait for some news.
Thanks in advance.
Frenky
We thought something was wrong with the library but we don't have enough experience about it and it became quite difficult.
We will wait for some news.
Thanks in advance.
Frenky
-
- Posts: 58
- Joined: Thu Aug 07, 2008 12:16 pm
Re: BLE nRF8001 - TOTAL_PORTS error
This issue is currently being worked on -
https://github.com/adafruit/Adafruit_BL ... -170395461
in the meantime you can manually install previous version of the Pin I/O code found here:
https://github.com/adafruit/Adafruit_BL ... dcc597f1d8
https://github.com/adafruit/Adafruit_BL ... -170395461
in the meantime you can manually install previous version of the Pin I/O code found here:
https://github.com/adafruit/Adafruit_BL ... dcc597f1d8
- dadeyemi11
- Posts: 5
- Joined: Tue Feb 23, 2016 12:32 pm
Re: BLE nRF8001 - TOTAL_PORTS error
I'm having that exact problem as well! Thanks for any help
- adafruit_support_mike
- Posts: 67446
- Joined: Thu Feb 11, 2010 2:51 pm
Re: BLE nRF8001 - TOTAL_PORTS error
Installing the previous version of the library, as mentioned above, should do the trick.
Please be positive and constructive with your questions and comments.