Voting resources, early voting, and poll worker information - VOTE. ... Adafruit is open and shipping.
0

Add more tv's, especially Telefunken
Moderators: adafruit_support_bill, adafruit

Please be positive and constructive with your questions and comments.

Add more tv's, especially Telefunken

by jordantsap on Tue Sep 29, 2020 11:32 am

I recently bought the kit unsoldered. I'll solder it but first I want some guidance on adding new television specifically Telefunken.
How to do that?
I also own both arduino and raspberrypi4b if that's needed.

jordantsap
 
Posts: 1
Joined: Tue Sep 29, 2020 11:17 am

Re: Add more tv's, especially Telefunken

by adafruit_support_bill on Tue Sep 29, 2020 12:27 pm

There is an example of decoding a signal from a SONY remote in the guide: https://learn.adafruit.com/tv-b-gone-ki ... -1094914-5
It requires an IR detection circuit to capture the signals from your remote.

This guide shows how to build an IR detection circuit that will work with your Pi: https://learn.adafruit.com/using-an-ir- ... dia-center

adafruit_support_bill
 
Posts: 79092
Joined: Sat Feb 07, 2009 10:11 am

Please be positive and constructive with your questions and comments.