0

MiniPOV as TV-B-Gone updated
Moderators: adafruit_support_bill, adafruit

Please be positive and constructive with your questions and comments.

MiniPOV as TV-B-Gone updated

by oPossum on Mon Jan 07, 2008 4:55 pm

I wanted a way to know what code was being sent, so I created this MiniPOV / TV-B-Gone hybrid. It uses socketed SIP resistors that allow configuration for use as a POV or TV-B-Gone. This allows firmware compatibility with the MiniPOV3 and use of all the POV LEDs when used as a TV-B-Gone. The firmware shows the current IR code in binary on the LEDs and uses code compression to allow 31 codes in the 2313'a 2K of flash memory.

Schematic
Image
Board
Image
SIP resistors configured for POV
Image
Works!
Image
SIP resistors configured for TV-B-Gone.
Image
SIP resistors configured for TV-B-Gone with a discrete resistor for Q1 base.
Image
Watch it work --->Quicktime Video
oPossum
 
Posts: 636
Joined: Fri Oct 26, 2007 12:42 am
Location: Michigan, USA

Please be positive and constructive with your questions and comments.