hello, after having mounted the kit and made all tests. the green LED blinks and the 4 IR LEDs start blinking too. but no tv does turns off. my batteries are new and I try on lots of tv. I think I have a blank chip. how to do ?
pics :
sorry for my English.
kit not work !
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
- adafruit_support_bill
- Posts: 88096
- Joined: Sat Feb 07, 2009 10:11 am
Re: kit not work !
If the chip was blank, the IR leds would not be blinking. What kinds of TV did you try it on?
- kevlar92
- Posts: 5
- Joined: Fri Dec 25, 2015 10:05 am
Re: kit not work !
hello, thank you for the answer :) I tried trademark: samsung sony phillips oceanic and funai ! it never works! except on the funai it lowers the sound.i'm in france.
- adafruit_support_bill
- Posts: 88096
- Joined: Sat Feb 07, 2009 10:11 am
Re: kit not work !
Those are some of the major brands, so they should be supported. And you have R3 installed, so it should be sending the European codes. Can you try it with one end of R3 disconnected?
- kevlar92
- Posts: 5
- Joined: Fri Dec 25, 2015 10:05 am
- adafruit_support_bill
- Posts: 88096
- Joined: Sat Feb 07, 2009 10:11 am
Re: kit not work !
It would be unusual for a part like that to fail, but let's check it. With one end still disconnected from the board, measure the resistance of R3.
- kevlar92
- Posts: 5
- Joined: Fri Dec 25, 2015 10:05 am
Re: kit not work !
I change the R3 and always the same thing. I am really disappointed. I do not just measure the output of r3 I do not have that materielle. that's why I buy a kit.
- adafruit_support_bill
- Posts: 88096
- Joined: Sat Feb 07, 2009 10:11 am
Re: kit not work !
We can try replacing the kit. Please contact [email protected] with a link to this thread.
- kevlar92
- Posts: 5
- Joined: Fri Dec 25, 2015 10:05 am
Re: kit not work !
ok mail send.
thanks for your help.
thanks for your help.
Please be positive and constructive with your questions and comments.