Black Lives Matter - Action and Equality. ... Adafruit is open and shipping.
0

VL53L0X No I2C device at address:29
Moderators: adafruit_support_bill, adafruit

Please be positive and constructive with your questions and comments.

VL53L0X No I2C device at address:29

by sensorsguy on Tue Jul 07, 2020 1:32 pm

I just started learning I2C and got the Adafruit VL53L0X Time of Flight Micro-LIDAR Distance Sensor Breakout: https://learn.adafruit.com/adafruit-vl5 ... cuitpython I am having problems finding the device when connected to my Jetson Nano. I get the value error of "No I2C device at address: 29." The SCL wire is hooked up to pin 28 and the SDA wire is connected to pin 27. If anyone knows how to change the address of a pin or has any other ideas on how to fix this it would be much appreciated!
Attachments
Screenshot from 2020-07-07 11-12-19.png
Screenshot from 2020-07-07 11-12-19.png (102.84 KiB) Viewed 25 times

sensorsguy
 
Posts: 1
Joined: Wed Sep 11, 2013 12:05 pm

Re: VL53L0X No I2C device at address:29

by dastels on Tue Jul 07, 2020 6:03 pm

You can run an I2C scanner (e.g. i2cdetect) to see what is found on the bus. That may help narrow down what's going down.

Dave

dastels
 
Posts: 3023
Joined: Tue Oct 20, 2015 3:22 pm

Please be positive and constructive with your questions and comments.