Hi, I have an older Bluefruit LE Friend, and it is a model with a 2.5 pin SWD connector at the end of the board. Exactly which cable do I need to purchase to connect to the board via the SWD connector to other peripherals? I purchased a cable, but the header is about 2x too large, and I am not coming any further by searching the internet. I would like to make sure that I am purchasing the correct thing before I order again.
Thank you!
SWD on Bluefruit LE Friend
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
- jjhelp
- Posts: 2
- Joined: Mon May 20, 2019 3:39 pm
SWD on Bluefruit LE Friend
- Attachments
-
- DE1FD9B4-358E-490A-B220-74ACAB50ED34.jpeg (183.34 KiB) Viewed 312 times
- adafruit_support_mike
- Posts: 67454
- Joined: Thu Feb 11, 2010 2:51 pm
Re: SWD on Bluefruit LE Friend
It's a 1.27mm (0.050") pitch connector, commonly used by some of the smaller JTAG pods.
We have the cables here:
https://www.adafruit.com/product/1675
and an adapter for 2.54mm (0.1") pitch connectors:
https://www.adafruit.com/product/2094
We have the cables here:
https://www.adafruit.com/product/1675
and an adapter for 2.54mm (0.1") pitch connectors:
https://www.adafruit.com/product/2094
- jjhelp
- Posts: 2
- Joined: Mon May 20, 2019 3:39 pm
Re: SWD on Bluefruit LE Friend
Thank you for your response. I have ordered the cable!
Please be positive and constructive with your questions and comments.