๐Ÿ“ฃ๐Ÿ“ช ๐Ÿšš Adafruit will not be shipping USPS orders Monday January 20, 2020 ๐Ÿ—“. Expedited USPS orders placed after 11am ET ๐Ÿ•š Friday January 17 will go out Tuesday January 21 ๐Ÿ“ฃ๐Ÿ“ช๐Ÿšš
0

Huzzah ESP32_ Breakout Board
Moderators: adafruit_support_bill, adafruit

Please be positive and constructive with your questions and comments.

Huzzah ESP32_ Breakout Board

by mdede on Mon Jun 17, 2019 4:10 pm

I I recently purchased a Huzzah32-ESP32 Breakout Board from a reseller. I tried to use the board but I could not load anything on to it. I started examining the board and noticed the ESP32 module is slight skewed and I believe that is why pins 35,36,37,and 38 are shorted together. This means the TX pin is shorted to Ground. Is there something you can do?

mdede
 
Posts: 5
Joined: Sat Jan 19, 2019 9:04 pm

Re: Huzzah ESP32_ Breakout Board

by franklin97355 on Mon Jun 17, 2019 4:13 pm

You should contact your reseller first but if you post pictures of the board we can take a look.

franklin97355
 
Posts: 21417
Joined: Mon Apr 21, 2008 2:33 pm
Location: Lacomb, OR.

Re: Huzzah ESP32_ Breakout Board

by mdede on Mon Jun 17, 2019 5:01 pm

I am not sure how you can tell from a picture that 4 pins are shorted but the picture I uploaded does show how misaligned the module is to the PCB.
Attachments
Huzzah_ESP32.jpg
Huzzah_ESP32.jpg (640.01 KiB) Viewed 135 times

mdede
 
Posts: 5
Joined: Sat Jan 19, 2019 9:04 pm

Re: Huzzah ESP32_ Breakout Board

by franklin97355 on Mon Jun 17, 2019 5:36 pm

OK, Please contact support@adafruit.com with a link to this topic and they will get you a replacement. Please tell them the reseller you bought this from so we can get in touch with them.

franklin97355
 
Posts: 21417
Joined: Mon Apr 21, 2008 2:33 pm
Location: Lacomb, OR.

Re: Huzzah ESP32_ Breakout Board

by mdede on Mon Jun 17, 2019 5:54 pm

Thank you for your help.

mdede
 
Posts: 5
Joined: Sat Jan 19, 2019 9:04 pm

Please be positive and constructive with your questions and comments.