Bluefruit Feather M0 Reset with Power Cycle

For Adafruit customers who seek help with microcontrollers

Moderators: adafruit_support_bill, adafruit

Please be positive and constructive with your questions and comments.
Locked
User avatar
sishipman
 
Posts: 1
Joined: Sat May 09, 2020 2:55 pm

Bluefruit Feather M0 Reset with Power Cycle

Post by sishipman »

Hi there,

I would say I'm very new to the world of hobby boards (I've only done a few tutorials) but I'm trying to help out some friends with a project they are working on.
Here's the synopsis: Using an Adafruit Feather M0 BLE board to power a servo from the Control Pad on the Bluefruit app.
Now here's why I'm posting my question here and not in the Bluetooth board.

Every time I start from the nRF51 "command" example https://learn.adafruit.com/introducing- ... controller, my board resets itself or "forgets" the code I've uploaded to it when I unplug the battery.
This is sort of a problem for the project I'm working on and according to all the Adafruit documentation, I should be able to disable the factory reset in the code easily by changing a "1" to a "0". This doesn't seem to be doing the trick though.

I'm way out of my league on the Bluetooth command side on this board, so I'd like to work from the example vs. building my own from scratch.
The sketch works for sure but doesn't *stick* when I disconnect and reconnect power.

Anyone have this issue and overcome it?

Locked
Please be positive and constructive with your questions and comments.

Return to “Microcontrollers”