0

Adafruit STEMMA Soil Sensor firmware for ATSAMD10
Moderators: adafruit_support_bill, adafruit

Please be positive and constructive with your questions and comments.

Adafruit STEMMA Soil Sensor firmware for ATSAMD10

by lincv on Thu Jun 04, 2020 6:59 am

https://www.adafruit.com/product/4026
Hi, I want to change this device on my board a little. The question is how to upload firmware in ATSAMD10, where can I get frimware for ATSAMD10? thank

lincv
 
Posts: 5
Joined: Thu Jun 04, 2020 6:52 am

Re: Adafruit STEMMA Soil Sensor firmware for ATSAMD10

by dastels on Thu Jun 04, 2020 9:36 am

It's one of the "seesaw" boards. Code is here: https://github.com/adafruit/seesaw.

Dave

dastels
 
Posts: 6778
Joined: Tue Oct 20, 2015 3:22 pm

Re: Adafruit STEMMA Soil Sensor firmware for ATSAMD10

by lincv on Sun Jun 07, 2020 3:24 am

Thanks!

lincv
 
Posts: 5
Joined: Thu Jun 04, 2020 6:52 am

Re: Adafruit STEMMA Soil Sensor firmware for ATSAMD10

by lincv on Tue Mar 02, 2021 5:39 am

Hi, you need to run this project in clion ide, is it real?

lincv
 
Posts: 5
Joined: Thu Jun 04, 2020 6:52 am

Re: Adafruit STEMMA Soil Sensor firmware for ATSAMD10

by dastels on Tue Mar 02, 2021 1:50 pm

I have no idea what you're talking about. The only requirements are:
  • make and a Unix environment
  • python in path
  • arm-none-eabi-gcc and arm-none-eabi-g++ in the path

dastels
 
Posts: 6778
Joined: Tue Oct 20, 2015 3:22 pm

Re: Adafruit STEMMA Soil Sensor firmware for ATSAMD10

by lincv on Wed Mar 03, 2021 3:55 am

this checklist for assembly. And I need to work with this project in clion, configure it to work in ide

lincv
 
Posts: 5
Joined: Thu Jun 04, 2020 6:52 am

Re: Adafruit STEMMA Soil Sensor firmware for ATSAMD10

by dastels on Wed Mar 03, 2021 10:00 am

I misunderstood. I have never heard of clion before now, so I can be of no help.

Dave

dastels
 
Posts: 6778
Joined: Tue Oct 20, 2015 3:22 pm

Re: Adafruit STEMMA Soil Sensor firmware for ATSAMD10

by lincv on Wed Mar 03, 2021 10:22 am

And when I collect make BOARD=soil , the output is a 14KB binary, it does not work on it if I flash the controller.

lincv
 
Posts: 5
Joined: Thu Jun 04, 2020 6:52 am

Please be positive and constructive with your questions and comments.