Monster/Ax-12

For Adafruit customers who seek help with microcontrollers

Moderators: adafruit_support_bill, adafruit

Please be positive and constructive with your questions and comments.
Locked
User avatar
Jerseylance1
 
Posts: 37
Joined: Wed Aug 07, 2019 5:27 am

Monster/Ax-12

Post by Jerseylance1 »

To whom it may concern, I would like to know can I get the monster mask to work with the AX-12servos? Because on the monster mask has a port for servos, so please let me know thank you….

User avatar
adafruit_support_bill
 
Posts: 88096
Joined: Sat Feb 07, 2009 10:11 am

Re: Monster/Ax-12

Post by adafruit_support_bill »

Not sure which AX-12 servo you re referring to, there are several servos with that model number from different manufacturers. As far as I know, these are all digital servos and do not respond to the standard RC-Servo control signals.

You could probably program the MonsterMask to control them. But it would not be as simple as just using the existing servo port and libraries.

User avatar
Jerseylance1
 
Posts: 37
Joined: Wed Aug 07, 2019 5:27 am

Re: Monster/Ax-12

Post by Jerseylance1 »

Thank you

User avatar
Jerseylance1
 
Posts: 37
Joined: Wed Aug 07, 2019 5:27 am

Re: Monster/Ax-12

Post by Jerseylance1 »

Ok thank you again, but also I’ve got a brain craft and got the image unto my small pi screen but my computer screen resolution is a bit off. Everything looks too big unto screen, so did I do something wrong?

User avatar
adafruit_support_bill
 
Posts: 88096
Joined: Sat Feb 07, 2009 10:11 am

Re: Monster/Ax-12

Post by adafruit_support_bill »

I don't have any hands-on experience with the BrainCraft HAT. If you start a new topic in our Raspberry Pi forum with 'BrainCraft' in the title, one of our BrainCraft experts should be able to help you out: posting.php?mode=post&f=50

User avatar
Jerseylance1
 
Posts: 37
Joined: Wed Aug 07, 2019 5:27 am

Re: Monster/Ax-12

Post by Jerseylance1 »

Hi there it’s me again, but AX-12 servos from robotis on which I want to work with the monster mask. Please reply back because I am in mix on doing a project for my class. Thank you, Mike.

User avatar
adafruit_support_bill
 
Posts: 88096
Joined: Sat Feb 07, 2009 10:11 am

Re: Monster/Ax-12

Post by adafruit_support_bill »

Robotis has a library for their servos here. This should work with the Monster mask: https://github.com/ROBOTIS-GIT/Dynamixel2Arduino

And further support information here: http://en.robotis.com/subindex/support.php

User avatar
Jerseylance1
 
Posts: 37
Joined: Wed Aug 07, 2019 5:27 am

Re: Monster/Ax-12

Post by Jerseylance1 »

Thank you again….

User avatar
Jerseylance1
 
Posts: 37
Joined: Wed Aug 07, 2019 5:27 am

Re: Monster/Ax-12

Post by Jerseylance1 »

To whom it may concern, can I use a raspberry pi with the monster mask?

User avatar
adafruit_support_bill
 
Posts: 88096
Joined: Sat Feb 07, 2009 10:11 am

Re: Monster/Ax-12

Post by adafruit_support_bill »

I'm sure that you can make them communicate in various ways. But I'm not a Pi expert. If you start a new thread and mention Monster Mask and Raspberry Pi in the title, one of our Raspberry Pi experts should be able to help you with the specifics.

User avatar
Jerseylance1
 
Posts: 37
Joined: Wed Aug 07, 2019 5:27 am

Re: Monster/Ax-12

Post by Jerseylance1 »

Thanks….

Locked
Please be positive and constructive with your questions and comments.

Return to “Microcontrollers”