Monster/Ax-12
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
- Jerseylance1
- Posts: 37
- Joined: Wed Aug 07, 2019 5:27 am
Monster/Ax-12
To whom it may concern, I would like to know can I get the monster mask to work with the AX-12servos? Because on the monster mask has a port for servos, so please let me know thank you….
- adafruit_support_bill
- Posts: 88096
- Joined: Sat Feb 07, 2009 10:11 am
Re: Monster/Ax-12
Not sure which AX-12 servo you re referring to, there are several servos with that model number from different manufacturers. As far as I know, these are all digital servos and do not respond to the standard RC-Servo control signals.
You could probably program the MonsterMask to control them. But it would not be as simple as just using the existing servo port and libraries.
You could probably program the MonsterMask to control them. But it would not be as simple as just using the existing servo port and libraries.
- Jerseylance1
- Posts: 37
- Joined: Wed Aug 07, 2019 5:27 am
Re: Monster/Ax-12
Ok thank you again, but also I’ve got a brain craft and got the image unto my small pi screen but my computer screen resolution is a bit off. Everything looks too big unto screen, so did I do something wrong?
- adafruit_support_bill
- Posts: 88096
- Joined: Sat Feb 07, 2009 10:11 am
Re: Monster/Ax-12
I don't have any hands-on experience with the BrainCraft HAT. If you start a new topic in our Raspberry Pi forum with 'BrainCraft' in the title, one of our BrainCraft experts should be able to help you out: posting.php?mode=post&f=50
- Jerseylance1
- Posts: 37
- Joined: Wed Aug 07, 2019 5:27 am
Re: Monster/Ax-12
Hi there it’s me again, but AX-12 servos from robotis on which I want to work with the monster mask. Please reply back because I am in mix on doing a project for my class. Thank you, Mike.
- adafruit_support_bill
- Posts: 88096
- Joined: Sat Feb 07, 2009 10:11 am
Re: Monster/Ax-12
Robotis has a library for their servos here. This should work with the Monster mask: https://github.com/ROBOTIS-GIT/Dynamixel2Arduino
And further support information here: http://en.robotis.com/subindex/support.php
And further support information here: http://en.robotis.com/subindex/support.php
- Jerseylance1
- Posts: 37
- Joined: Wed Aug 07, 2019 5:27 am
Re: Monster/Ax-12
To whom it may concern, can I use a raspberry pi with the monster mask?
- adafruit_support_bill
- Posts: 88096
- Joined: Sat Feb 07, 2009 10:11 am
Re: Monster/Ax-12
I'm sure that you can make them communicate in various ways. But I'm not a Pi expert. If you start a new thread and mention Monster Mask and Raspberry Pi in the title, one of our Raspberry Pi experts should be able to help you with the specifics.
Please be positive and constructive with your questions and comments.