Not sure why, but it's acting like you're touching the screen to change the mode:1. If you look at the movie, yu can see the "hour" flashing between 12/24 HR all the time, together with (in this case) the "PM" signing going on/off together with the hour.
https://github.com/adafruit/esp8266-wea ... r.ino#L231
In the upper right? I think that's wifi quality:2. The battery status is not stable. It keeps on flashing between 100% and 70%. Only when you put the little box very stable, it seems to stay at 100%. Can this have to do with a gyro on-board (no idea if this is in the device?) ?
https://github.com/adafruit/esp8266-wea ... r.ino#L531
Is this an interference issue at this step?3. I can not get the switch installed and then install the screen in the box. I suppose this can be solved by shortening the switch pins and soldering so it is not this high.
https://learn.adafruit.com/wifi-weather ... bly#step-7
Add a small delay as described here:4. Very strange, but if I switch the device off and enable it again, the screen stays grey and I need to click the "reset" button on the bottom of the screen.
viewtopic.php?f=57&t=134255#p696260