Hi
I have TFT 1.8" Display(ST7735) 128x160 pixel connected to ST micro controller, i have configured all pins.
Lite
MISO - only for SD card
SCLK -
MOSI -
TFT_CS -
Card CS - SD card selection pin
D/C -
RST -
Vcc -
GND
I can bale to display images and text on display.
But not able interact with SD card
1. How to read basic information from SD card(Some dummy data)
2. where to find driver code for SD card
3.How to now for which commands it send/receive data from spi Master.
Please respond immediately, better provide any contact number for technical discussion.
Thanks,
Venkat
1.8" TFT Display Breakout and Shield, Not able to mount/read
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
- venkata_visweswarachari
- Posts: 1
- Joined: Thu Sep 13, 2018 7:08 am
Please be positive and constructive with your questions and comments.