1.8" TFT Display Breakout and Shield, Not able to mount/read

Post here about your Arduino projects, get help - for Adafruit customers!

Moderators: adafruit_support_bill, adafruit

Please be positive and constructive with your questions and comments.
Locked
User avatar
venkata_visweswarachari
 
Posts: 1
Joined: Thu Sep 13, 2018 7:08 am

1.8" TFT Display Breakout and Shield, Not able to mount/read

Post by venkata_visweswarachari »

Hi

I have TFT 1.8" Display(ST7735) 128x160 pixel connected to ST micro controller, i have configured all pins.

Lite
MISO - only for SD card
SCLK -
MOSI -
TFT_CS -
Card CS - SD card selection pin
D/C -
RST -
Vcc -
GND

I can bale to display images and text on display.

But not able interact with SD card
1. How to read basic information from SD card(Some dummy data)
2. where to find driver code for SD card
3.How to now for which commands it send/receive data from spi Master.

Please respond immediately, better provide any contact number for technical discussion.


Thanks,
Venkat

Locked
Please be positive and constructive with your questions and comments.

Return to “Arduino”