0

New to IoT need help to start project. SHT10
Moderators: adafruit_support_bill, adafruit

Please be positive and constructive with your questions and comments.

New to IoT need help to start project. SHT10

by Matiasow on Thu Dec 20, 2018 2:24 pm

Hi all.. Im new to IoT but want to learn, I hope you can help me getting started with my project.

Maybe the project is simply, but not for me :-).

I want to place a Mesh-protected Weather-proof Temperature/Humidity Sensor - SHT10 (https://www.adafruit.com/product/1298) in my summerhouse.

The summerhouse has no WiFi to send data. During my research I discovered Sigfox which can send data without a simcard and without internet.

So what I want to make in my project:

A device that can send data about humidity and temperature to me with the Sigfox network (or something similar) using the SHT10 (as above). My research led me to belive that I need a arduino to do the job - could the ARDUINO MKR FOX 1200 do the job?

And what else do I need to get this project started? Like power supplies, cases - other things?

I really hope you guys can help me!

Matiasow
 
Posts: 1
Joined: Thu Dec 20, 2018 2:13 pm

Re: New to IoT need help to start project. SHT10

by franklin97355 on Thu Dec 20, 2018 4:25 pm

It looks like it should work just fine. You might try asking in the Arduino forums as they are the makers.

franklin97355
 
Posts: 20636
Joined: Mon Apr 21, 2008 2:33 pm
Location: Lacomb, OR.

Please be positive and constructive with your questions and comments.