0

Adafruit Breakout Board SPI Error After Soldering
Moderators: adafruit_support_bill, adafruit

Please be positive and constructive with your questions and comments.

Adafruit Breakout Board SPI Error After Soldering

by Sa5jared on Thu May 23, 2019 4:51 am

Hi,

I am working on a project with the Adafruit microSD breakout board. I am using the board with an Arduino Nano and an ArduCAM mini camera. When the circuit was setup on a breadboard it worked well. But when I soldered wire connections between the 3 I am getting SPI errors. For the microSD board I am getting that there is an SD card error. These issues only arose after I soldered everything together. And yes I've checked all solder joints and that I've made the correct connections.

Any ideas as to why I'm getting these errors?

Thanks!

Sa5jared
 
Posts: 1
Joined: Thu May 23, 2019 4:37 am

Re: Adafruit Breakout Board SPI Error After Soldering

by adafruit_support_carter on Fri May 24, 2019 12:55 pm

Post a photo of your setup showing how everything is connected.

adafruit_support_carter
 
Posts: 13216
Joined: Tue Nov 29, 2016 2:45 pm

Please be positive and constructive with your questions and comments.