๐Ÿ“ฃ๐Ÿ“ช ๐Ÿšš Adafruit will not be shipping USPS orders Monday January 20, 2020 ๐Ÿ—“. Expedited USPS orders placed after 11am ET ๐Ÿ•š Friday January 17 will go out Tuesday January 21 ๐Ÿ“ฃ๐Ÿ“ช๐Ÿšš
0

BME280 Humidity Reading Discrepancy
Moderators: adafruit_support_bill, adafruit

Please be positive and constructive with your questions and comments.

BME280 Humidity Reading Discrepancy

by RossDBrain on Wed Aug 28, 2019 7:59 am

I have a pair of BME280's on Adafruit breakout boards, running side by side in open air reading ~10%RH apart.

Is this issue likely to be fixable by going through the reconditioning procedure or is the discrepancy too large and indicative of damage?

Both sensors are set to the same filtering/averaging, and are read out via an Arduino.
Both sensors have had pins soldered to their breakout board adhering to the soldering instructions, then left for 5+ days at 25C/40%RH to settle.
The sensors are from different lot numbers (736 and 672)

Image

RossDBrain
 
Posts: 1
Joined: Wed Aug 28, 2019 7:56 am

Please be positive and constructive with your questions and comments.