Voting resources, early voting, and poll worker information - VOTE. ... Adafruit is open and shipping.
0

Feather MO with CAP1188
Moderators: adafruit_support_bill, adafruit

Please be positive and constructive with your questions and comments.

Feather MO with CAP1188

by Langoni on Tue Feb 04, 2020 9:43 am

Dear all,
I tried CAP1188 with arduino UNO and it worked perfectly. However I am not getting any results with the Feather MO board. I tried the I2C and SPI configurations with no success. The system seems completely dead.
Do you have some advice about?

Thanks for any help...

Cesar

Langoni
 
Posts: 16
Joined: Mon Sep 30, 2019 11:44 am

Re: Feather MO with CAP1188

by adafruit_support_bill on Tue Feb 04, 2020 10:26 am

Please post some photos showing your soldering and connections.

adafruit_support_bill
 
Posts: 79031
Joined: Sat Feb 07, 2009 10:11 am

Re: Feather MO with CAP1188

by Langoni on Tue Feb 04, 2020 12:43 pm

[img]IMG_0521.jpg[/img]

Between the time I made the first post and your response, I found that when I removed the TSL2561 sensor from the circuit, the system started working. I checked the address of the TSL2561 and found that it is exactly the same as the original address of the CAP1188. So I must assume that this is an address conflict. In that case, what would be my best option?

Thanks,

Cesar

Langoni
 
Posts: 16
Joined: Mon Sep 30, 2019 11:44 am

Re: Feather MO with CAP1188

by adafruit_support_bill on Tue Feb 04, 2020 1:43 pm

You can change the i2c address on the TSL2561. See the bottom of this page in the guide:
https://learn.adafruit.com/tsl2561/wiri ... 561-sensor

adafruit_support_bill
 
Posts: 79031
Joined: Sat Feb 07, 2009 10:11 am

Re: Feather MO with CAP1188

by Langoni on Tue Feb 04, 2020 2:43 pm

Ok, I will do...

Thank you,

Cesar

Langoni
 
Posts: 16
Joined: Mon Sep 30, 2019 11:44 am

Please be positive and constructive with your questions and comments.