Turn off LED BMP390
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
- santosgonzalez
- Posts: 7
- Joined: Thu Jul 15, 2021 9:26 pm
Turn off LED BMP390
Is there any way to turn off the ON LED of the BMP390 breakout? I'm trying to minimize the power consumption as much as possible, and all the small bits will help.
- millercommamatt
- Posts: 818
- Joined: Tue Jul 31, 2018 4:57 pm
Re: Turn off LED BMP390
You can desolder it.
You can break it off with some pliers.
The easiest place to cut a trace looks to be on the positive side between the LED and the resistor (R5).
There's no way to do it via software.
You can break it off with some pliers.
The easiest place to cut a trace looks to be on the positive side between the LED and the resistor (R5).
There's no way to do it via software.
- santosgonzalez
- Posts: 7
- Joined: Thu Jul 15, 2021 9:26 pm
Re: Turn off LED BMP390
Thanks, I'll give that a go!
Please be positive and constructive with your questions and comments.