I think I have a broken board. The most basic stuff does not even work like a blink sketch. The board does not respond to adruino code like this:
Code: Select all
void setup() {
pinMode(10, OUTPUT);
}
void loop() {
digitalWrite(10, HIGH);
delay(1000);
digitalWrite(10, LOW);
delay(1000);
}
I tried absolutely everything regarding hardware (cabels, powersupply, ...)AND software (multiple Bootloader upgrades manually with cmd and through arduino ide, multiple driver deinstalations and instalations, as well as the whole arduino ide) to fix this problem. No matter what I try, hte board does not behave in the intended way...