I am sorry if I've posted this in the wrong place.
In Arduino IDE I uploaded a Wio Terminal Sketch 'Celluar Automata. It compiled with success, but the Wio Terminal screen showed nothing just black screen. The same thing happens each of the examples from the 320x240 folder from the Seeed Arduino LCD Repo.
The ONLY sketch that does work is the Blink sketch.
All the example Sketches from the Arduino LCD Repo DID WORK 3 days ago. I mistakenly deleted the TFT-ESPI library then the sketch would not work. I put the TFT-ESPI library sketch back in the Libraries folder and Uncommented the line in User_Setup_Select #include <User_Setups/Setup1_IlI9341.h to no avail. Am I leaving any steps out?
Any help is greatly appreciated.
Tony Wheat
Wio Terminal black screen
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
- adafruit_support_mike
- Posts: 67446
- Joined: Thu Feb 11, 2010 2:51 pm
Re: Wio Terminal black screen
Check with the folks over in the Seeed forums:
https://forum.seeedstudio.com/
They know the details of the Wio Terminal better than we do.
If they identify a hardware problem, post back with a link to your thread in the Seeed forums and we'll follow up from there.
https://forum.seeedstudio.com/
They know the details of the Wio Terminal better than we do.
If they identify a hardware problem, post back with a link to your thread in the Seeed forums and we'll follow up from there.
Please be positive and constructive with your questions and comments.