0

CAP1188 Reset / Recalibration
Moderators: adafruit_support_bill, adafruit

Please be positive and constructive with your questions and comments.

CAP1188 Reset / Recalibration

by michael_rosenits on Tue Jan 16, 2018 7:14 am

Hello,

i have to know, how to reset the CAP1188 via I2C ?

In all tutorials and topics there is told about a reset pin. But how can i reset or recalibrate the module without power off and restart the whole project ?

Thanks for your reply

michael_rosenits
 
Posts: 1
Joined: Tue Jan 16, 2018 7:10 am

Re: CAP1188 Reset / Recalibration

by adafruit_support_bill on Tue Jan 16, 2018 8:17 am

To reset the device, you need to use the reset pin. Set the pin high to initiate the reset. Then set it low again to resume normal operation.

SPI supports a reset command - but that only affects the SPI protocol. All other registers are unaffected.

adafruit_support_bill
 
Posts: 69809
Joined: Sat Feb 07, 2009 10:11 am

Please be positive and constructive with your questions and comments.