0

Need advice on using MP3 shield on a project
Moderators: adafruit_support_bill, adafruit

Please be positive and constructive with your questions and comments.

Need advice on using MP3 shield on a project

by Blueshark on Mon Feb 04, 2019 8:10 pm

I'm using these shields

MP3 shield...
https://www.adafruit.com/product/1790

TFT Touch Shield...
https://www.adafruit.com/product/1651

They both use SPI to communicate with the Arduino, I checked the pins they don't cross each other; only one set of pins cross each other on these shields.... pin 4 ….. they both use pin 4 for the SD card CS pin.

Do I just leave it alone and hope they dont interfere or do I change the SD card CS pin on the MP3 shield because I can by cutting the pin 4 trace and use onther available pin see photos...

MP3 Shield front...

https://drive.google.com/file/d/1v09IAKfwpFMoR3LAGyNmsz4iaGyLRFg9/view?usp=sharing

MP3 Shield back

https://drive.google.com/file/d/1EAd9yKRhVsQrZND0RD8_LdlS6DyNmiQL/view?usp=sharing


Cheers...

Blueshark
 
Posts: 101
Joined: Thu Dec 21, 2017 7:19 pm

Please be positive and constructive with your questions and comments.