0

mechanical information for HMC5883L
Moderators: adafruit_support_bill, adafruit

Please be positive and constructive with your questions and comments.

mechanical information for HMC5883L

by ron2k19 on Mon Nov 23, 2020 10:29 pm

imagen.png
imagen.png (157.52 KiB) Viewed 199 times


Hi there,

Is there someone who can help us to identify the missing dimensions/references for this part? HMC5883L (See screenshot) Thanks![img][img][/img][/img]

ron2k19
 
Posts: 11
Joined: Tue Nov 12, 2019 8:35 am

Re: mechanical information for HMC5883L

by millercommamatt on Tue Nov 24, 2020 5:07 pm

0.1 inches between the centers of the small pin holes. That's a standard size.

millercommamatt
 
Posts: 653
Joined: Tue Jul 31, 2018 4:57 pm

Re: mechanical information for HMC5883L

by ron2k19 on Wed Feb 17, 2021 4:07 am

I see but I still need the height and dimensions of the header strips. (See screenshots)
Attachments
imagen (1).png
imagen (1).png (107.58 KiB) Viewed 76 times

ron2k19
 
Posts: 11
Joined: Tue Nov 12, 2019 8:35 am

Re: mechanical information for HMC5883L

by millercommamatt on Wed Feb 17, 2021 2:53 pm

The pins are typically 0.025" square. The typical pitch is 0.1". All dimensions can be ordered to spec.

In the case of the header you've taken a picture of, the insulator is 0.1" in height and depth. The pins slide in the insulator so your y1 dimension is variable. In the case of your picture, the pin extends 0.25" above the insulation and 0.12" below.

The overall pin length is 0.47".

Again, you can order pin headers just about anyway you want them.

millercommamatt
 
Posts: 653
Joined: Tue Jul 31, 2018 4:57 pm

Please be positive and constructive with your questions and comments.