Please note: Friday June 18 is a holiday celebrating Juneteenth, please allow extra time for your order to arrive and plan accordingly.
0

Music Maker, Couldn't find VS1053
Moderators: adafruit_support_bill, adafruit

Please be positive and constructive with your questions and comments.

Music Maker, Couldn't find VS1053

by eranbenjamin on Sun Apr 04, 2021 3:15 am

Hi,
1. I am using an Adafruit "Music Maker" (MM) MP3 Shield (order #2511924-8852141374) connected to an Arduino MEGA by stacable headers (see picture).
2. The MM Sheild ICSP connections (namely MISO, SCK, and MOSI) are shorted as instructed.
3. SW:
a. I uploaded the “Player_Simple” sketch.
b. In the Adafruit_VS1053.cpp file, I have uncommented the following lines:
dumpRegs();
Serial.print("Version = "); Serial.println(v);
c. The output is:
Adafruit VS1053 Library Test
Mode = 0x0
Stat = 0x0
ClkF = 0x0
Vol. = 0x0
Version = 0
Couldn't find VS1053, do you have the right pins defined?
4. I am following the Learning System @ https://learn.adafruit.com/adafruit-mus ... play-music

Can you please advice? What I am missing?
Thanks!
Attachments
image0rr.jpeg
image0rr.jpeg (797.88 KiB) Viewed 267 times
image2r.jpeg
image2r.jpeg (823.02 KiB) Viewed 267 times
image4reduce less.jpeg
image4reduce less.jpeg (864.69 KiB) Viewed 267 times

eranbenjamin
 
Posts: 11
Joined: Wed Mar 10, 2021 2:03 pm

Re: Music Maker, Couldn't find VS1053

by adafruit_support_carter on Mon Apr 05, 2021 1:38 pm


adafruit_support_carter
 
Posts: 20355
Joined: Tue Nov 29, 2016 2:45 pm

Re: Music Maker, Couldn't find VS1053

by eranbenjamin on Thu Apr 08, 2021 3:42 pm

I have all pins soldered: See the attached images: Top and Bottom side of the Music Maker board, AND the MM board connected to the Arduino MEGA 2560.
Still, same response:
-------------------------- >0 --------------------------
Adafruit VS1053 Library Test
Mode = 0x0
Stat = 0x0
ClkF = 0x0
Vol. = 0x0
Version = 0
Couldn't find VS1053, do you have the right pins defined?
-------------------------- >0 --------------------------

Any idea? Am I missing something?


In addition, the audio jack pop back 1-2 mm after inserting it to the audio socket. is that ok?
Attachments
image2xr.jpg
image2xr.jpg (751.93 KiB) Viewed 247 times
image1xr.jpeg
image1xr.jpeg (932.45 KiB) Viewed 247 times
image0xr.jpeg
image0xr.jpeg (787.59 KiB) Viewed 247 times

eranbenjamin
 
Posts: 11
Joined: Wed Mar 10, 2021 2:03 pm

Re: Music Maker, Couldn't find VS1053

by adafruit_support_carter on Thu Apr 08, 2021 4:10 pm

Thanks. That soldering looks great!

In the example sketch, did you change these lines up?
Code: Select all | TOGGLE FULL SIZE
  // create breakout-example object!
  Adafruit_VS1053_FilePlayer(BREAKOUT_RESET, BREAKOUT_CS, BREAKOUT_DCS, DREQ, CARDCS);
  // create shield-example object!
  //Adafruit_VS1053_FilePlayer(SHIELD_RESET, SHIELD_CS, SHIELD_DCS, DREQ, CARDCS);

You'll want to comment out the breakout line and uncomment the shield line.

adafruit_support_carter
 
Posts: 20355
Joined: Tue Nov 29, 2016 2:45 pm

Re: Music Maker, Couldn't find VS1053

by eranbenjamin on Thu Apr 08, 2021 4:20 pm

I changed (I did that initially but then downloaded again without changing).
It works!

Thank you.

eranbenjamin
 
Posts: 11
Joined: Wed Mar 10, 2021 2:03 pm

Please be positive and constructive with your questions and comments.