apoligize if this has been covered , I didn't see anything with a search . I have a project that I plan to build . The plans call out for a Adafruit 2.8 TFT # 1651 shield . I would like to use a larger screen like a 3.5 or maybe larger , but I am just learning this stuff & would like to find a larger shield that it 100 % pin compatable with the 2.8 # 1651 . Can someong kindly point me in teh right direction . As of right now I don't have the smarts to change any code for a shield that is not 100 % compatable .
thanks
animal12
Adafruit # 1651 2.8 TFT Shield cross
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
- mikeysklar
- Posts: 14194
- Joined: Mon Aug 01, 2016 8:10 pm
Re: Adafruit # 1651 2.8 TFT Shield cross
You will probably want to stick with the 2.8" TFT Shield.
The only 3.5" TFT screens we offer are not at all in the same form factor. They are not "shields", but breakout and Featherwing format.
https://learn.adafruit.com/adafruit-3-5 ... n-breakout
https://learn.adafruit.com/adafruit-3-5-tft-featherwing
We do of course sell larger touch screens, but you will quickly need to move off an Arduino form factor and switch over to a Pi so a completely different set of tools to adapt to.
The only 3.5" TFT screens we offer are not at all in the same form factor. They are not "shields", but breakout and Featherwing format.
https://learn.adafruit.com/adafruit-3-5 ... n-breakout
https://learn.adafruit.com/adafruit-3-5-tft-featherwing
We do of course sell larger touch screens, but you will quickly need to move off an Arduino form factor and switch over to a Pi so a completely different set of tools to adapt to.
- animal12
- Posts: 4
- Joined: Thu Jun 17, 2021 9:57 pm
Re: Adafruit # 1651 2.8 TFT Shield cross
thank you much . that was just the kind oe awnser I needed
thanks
animal12
thanks
animal12
Please be positive and constructive with your questions and comments.