Hi,
I have an Arduino Uno Wifi Rev2 and am planning to connect an Air Quality environmental sensor (SGP40) to the board paired with the recommended humidity sensor (SHT31-D).
https://www.adafruit.com/product/4829
https://www.adafruit.com/product/2857
I might expand the number of sensors attached to the Arduino in the future, so I would like to know if there is a shield available that would allow me to attach the 2+ sensors (maybe up to 4 in the future) without soldering.
Also, please let me know the exact connectors to purchase to attach the sensors to the shield directly.
Thanks!
Arduino Shield for Multiple Sensor Connections
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
- silverage
- Posts: 28
- Joined: Sun Jan 27, 2019 5:14 pm
- dastels
- Posts: 15817
- Joined: Tue Oct 20, 2015 3:22 pm
Re: Arduino Shield for Multiple Sensor Connections
I don't see anything in the Adafruit shop, but you can get the Qwiic shield from sparkfun (product 14352) which will work with STEMMA-QT cables and sensors. Both the boards you linked to have STEMMA-QT boards. That shield has 4 connectors which will leave you 2 to use for other sensors.
Dave
Dave
Please be positive and constructive with your questions and comments.