There is no USPS pickup on Monday Feb 15th, 2016 because of President's Day. USPS orders placed after 11am EST Fri February 12th will go out Tuesday February 16. UPS orders will ship as normal.

Stacking a motor shield and a wave shield.
Moderators: adafruit_support_bill, adafruit

Please be positive and constructive with your questions and comments.

Stacking a motor shield and a wave shield.

by unorthodoxarts on Fri Dec 28, 2012 2:16 pm

Hi All,

Complete newb - please excuse the silly question. I am trying to build a fortune teller machine (naturally,) and I am hoping to stack a wave shield and a motor shield to use two servos and a stepper motor. (I also need two different relay inputs, not that I think that matters.) I know that some of the pins for the two shields conflict.

Halp.

Much thanks.
-K
unorthodoxarts
 
Posts: 11
Joined: Fri Dec 28, 2012 2:13 pm

Re: Stacking a motor shield and a wave shield.

by adafruit_support_bill on Fri Dec 28, 2012 2:29 pm

You are going to have both pin conflicts and timer conflicts. You can work around the timer conflicts with some library hacking. The pin conflicts can be worked around by a bit of cut & jumper work on the shield and some more library hacking. An easier path might be to use one of these for the servos: https://www.adafruit.com/products/815
And one of the serial stepper controllers from Pololu.

adafruit_support_bill
 
Posts: 45706
Joined: Sat Feb 07, 2009 10:11 am

Re: Stacking a motor shield and a wave shield.

by unorthodoxarts on Fri Dec 28, 2012 2:37 pm

Thanks for the quick reply, super-awesome support person. I think I'll go the easier path. :)
unorthodoxarts
 
Posts: 11
Joined: Fri Dec 28, 2012 2:13 pm

Please be positive and constructive with your questions and comments.