0

Raspberry pi 2
Moderators: adafruit_support_bill, adafruit

Please be positive and constructive with your questions and comments.

Raspberry pi 2

by programmer101 on Tue Jun 23, 2015 8:08 am

Help! I am using a raspberry pi 2 b+ and when I connect it over usb and hdmi to a tv monitor the power and act lights turn on but I am getting no signal. I do have an sd card in with the pi 2 version of retropie. I think this is defective because when I connected everything to my other raspberry pi 2 b+ using the same sd card everything was fine. And yes I did connect everything properly. Please help.

programmer101
 
Posts: 7
Joined: Mon Jun 22, 2015 4:43 pm

Re: Raspberry pi 2

by adafruit_support_rick on Tue Jun 23, 2015 10:10 am

Have you tried booting NOOBS on the Pi?

Have a look at this troubleshooting page:
http://elinux.org/R-Pi_Troubleshooting

In particular, these two sections:
http://elinux.org/R-Pi_Troubleshooting# ... put_at_all
http://elinux.org/R-Pi_Troubleshooting# ... r_problems

adafruit_support_rick
 
Posts: 35095
Joined: Tue Mar 15, 2011 11:42 am
Location: Buffalo, NY

Re: Raspberry pi 2

by programmer101 on Tue Jun 23, 2015 10:31 am

Yes in fact I have. I tried the noobs raspbian and all work on my previous pi but not on the one I ordered.

programmer101
 
Posts: 7
Joined: Mon Jun 22, 2015 4:43 pm

Re: Raspberry pi 2

by franklin97355 on Tue Jun 23, 2015 10:54 am

Please don't double post. Follow up in your original post http://forums.adafruit.com/viewtopic.php?f=4&t=75771

franklin97355
 
Posts: 19427
Joined: Mon Apr 21, 2008 2:33 pm
Location: Lacomb, OR.

Please be positive and constructive with your questions and comments.