0

Corrdinator - Router - Router Communication
Moderators: adafruit_support_bill, adafruit

Please be positive and constructive with your questions and comments.

Corrdinator - Router - Router Communication

by sezerk on Mon Jun 12, 2017 10:50 am

Hi everyone,

I am working on Xbee (XB24-Z7UIT-004) nowadays. I got 3 xbee, 3 arduino. I want to send a massege from one arduino to the others.

When I configured the coordinator as "Coordinator AT" and the other as "Router AT", everything is OK.
But when I configured them "Coordinator API" and the other as "Router API", it is not OK. After all, I configured the other arduino as "End Device API". But I failed again.

I can see the comminication between 3 arduinos as below. But I could not send message.
Is there anybody who can help me?


Image
Image
Image
Image

You can see the code below

// TRANSMITTER
Code: Select all | TOGGLE FULL SIZE
#include <XBee.h>
XBee xbee = XBee();

void setup()
{
 pinMode(13, OUTPUT);
 Serial.begin(9600);
 Serial.flush();
 xbee.setSerial(Serial);
 xbee.begin(Serial);
}

void loop()
{
 // Create an array for holding the data you want to send.
 uint8_t payload[] = { 255, 128 };
 
 // Specify the address of the remote XBee (this is the SH + SL)
 XBeeAddress64 addr64 = XBeeAddress64(0x0013A200, 0x40BAA50C);
 
 // Create a TX Request
 ZBTxRequest zbTx = ZBTxRequest(addr64, payload, sizeof(payload));
 
 // Send your request
 xbee.send(zbTx);

 digitalWrite(13, HIGH);
 delay(100);
 digitalWrite(13, LOW);
 delay(100);
}


// RECEIVER
Code: Select all | TOGGLE FULL SIZE
#include <XBee.h>

XBee xbee = XBee();
ZBRxResponse ZBRx16 = ZBRxResponse();
#define MAX_FRAME_DATA_SIZE 110

bool toggle = false;
void setup()
{
 pinMode(13, OUTPUT);
 Serial.begin(9600);
 Serial.flush();
 xbee.begin(Serial);
}

void loop()
{
   xbee.readPacket();  
   if (xbee.getResponse().isAvailable())
   {
      toggle = !toggle;
      // got something
      xbee.getResponse().getZBRxResponse(ZBRx16);

      //if (ZBRx16.getData(1) == 255)
        digitalWrite(13, toggle);  
   }
  
}

What I am doing wrong?

sezerk
 
Posts: 1
Joined: Mon Jun 12, 2017 10:48 am

Re: Corrdinator - Router - Router Communication

by franklin97355 on Mon Jun 12, 2017 2:08 pm

This might be a question better asked in the Digi forums.

franklin97355
 
Posts: 16849
Joined: Mon Apr 21, 2008 2:33 pm
Location: Lacomb, OR.

Please be positive and constructive with your questions and comments.