And if you get a (free!) flickr account, you can also put it in the adafruits pool and tag it 'clock' to have it show up on the product page
please post adafruit clocks!
pix go after this post --->
Snap a picture of your ADAFRUIT clock and post it here!
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
-
- Posts: 12151
- Joined: Thu Apr 06, 2006 4:21 pm
-
- Posts: 12151
- Joined: Thu Apr 06, 2006 4:21 pm
- ssquire
- Posts: 9
- Joined: Mon Feb 01, 2010 7:26 pm
Re: Snap a picture of your clock and post it here!
Both clocks!
Link to Flickr: http://www.flickr.com/photos/21205993@N ... 386290131/
Link to Flickr: http://www.flickr.com/photos/21205993@N ... 386290131/
- Attachments
-
- CIMG0342 (Small).JPG (49.08 KiB) Viewed 30255 times
- caitsith2
- Posts: 217
- Joined: Thu Jan 18, 2007 11:21 pm
- scout119
- Posts: 10
- Joined: Mon Jan 04, 2010 11:02 pm
Re: Snap a picture of your clock and post it here!
Last edited by scout119 on Tue Oct 11, 2011 10:12 am, edited 1 time in total.
- mike31416
- Posts: 126
- Joined: Wed Aug 26, 2009 12:06 pm
Re: Snap a picture of your clock and post it here!
Mine, My WiseClock and my brothers...
-
- Posts: 4
- Joined: Fri Feb 26, 2010 9:21 pm
Re: Snap a picture of your clock and post it here!
Easy build. Postman arrived at 10:30, kit finished at 12:00. Note the well organized work area.
- poindexter
- Posts: 2
- Joined: Sun Feb 28, 2010 12:13 am
Re: Snap a picture of your clock and post it here!
More clock on clock action. It's a meme. Deal with it.
- Attachments
-
- Clock on Clock.jpg (67.61 KiB) Viewed 30107 times
- tdel
- Posts: 2
- Joined: Sun Feb 28, 2010 12:20 am
- ericgus
- Posts: 33
- Joined: Mon Mar 01, 2010 11:10 am
- janafunk
- Posts: 1
- Joined: Mon Mar 01, 2010 1:22 pm
Re: Snap a picture of your clock and post it here!
Here's mine from Windsor(UK).....just built it today and now all powered up!....
next is to figure out custom FW....
next is to figure out custom FW....
- kero905
- Posts: 13
- Joined: Sun Dec 06, 2009 12:58 pm
Re: Snap a picture of your clock and post it here!
So I heard u like clocks on clocks. Me too! I know the warranty card is usually like "dun put clocks on clocks u guys", but I can't help it! I don't have a MONOCHRON (yet), but my chumby will get into the action. Best meme evaaa! CLocks FTW!
dark:
Link to flickr that I am suppose to post due to Flickr Community Guidelines on posting to external sites: http://www.flickr.com/photos/keroism/4399035651/
dark:
Link to flickr that I am suppose to post due to Flickr Community Guidelines on posting to external sites: http://www.flickr.com/photos/keroism/4399035651/
-
- Posts: 4
- Joined: Tue Mar 02, 2010 4:27 am
Re: Snap a picture of your clock and post it here!
its based on the idea behind Peggy board
and powered by an Arduino
and powered by an Arduino
- Attachments
-
- 2010-03-02 10.23.01.jpg (40.67 KiB) Viewed 29770 times
-
- Posts: 1
- Joined: Tue Mar 02, 2010 6:37 pm
A late night finish in Las Vegas
Took most of the night,
But finished up the Monochron tonight in one sitting.
Small problem: Once assembled, buttons failed to operated.
Disconnected power, removed battery, reconnected power, reinserted battery, it works!
Isn't this the same problem we experience with the Ice Tube Clock?
Fantasic build though!
Both projects have been incredible fun for a Padawan trainee.
But finished up the Monochron tonight in one sitting.
Small problem: Once assembled, buttons failed to operated.
Disconnected power, removed battery, reconnected power, reinserted battery, it works!
Isn't this the same problem we experience with the Ice Tube Clock?
Fantasic build though!
Both projects have been incredible fun for a Padawan trainee.
- dataman
- Posts: 98
- Joined: Wed May 20, 2009 7:03 pm
Another set of stacked clocks in Vegas!
AdaGeneral has declared that clock stocking may be hazardous to their health.
Stack only in safe conditions with little crosswinds.
Exercise caution in tripping over power cables.
No clocks were harmed in the staging of this photo...
Please be positive and constructive with your questions and comments.