Voting resources, early voting, and poll worker information - VOTE. ... Adafruit is open and shipping.
0

Bootloading Monochron
Moderators: adafruit_support_bill, adafruit

Please be positive and constructive with your questions and comments.

Bootloading Monochron

by Squar0L on Sun Mar 14, 2010 10:01 pm

I'm trying to load Xdalichron through a Sparkfun FTDI adapter, but not sure if Monochron has a bootloader. This is how my avrdude command look like:
Code: Select all | TOGGLE FULL SIZE
make program
avrdude -p atmega328p -P com7 -c stk500 -B 19200 -U flash:w:monochron.hex
avrdude: stk500_getsync(): not in sync: resp=0x00
make: *** [program] Error -1073741819

Then avrdude crashes. Any idea? My FTDI has DTR for the reset - would that still work?
Squar0L
 
Posts: 6
Joined: Sun Feb 28, 2010 2:05 am

Re: Bootloading Monochron

by jmsunseri on Mon Mar 15, 2010 12:47 am

I hope this helps. I was having difficulty programming my monochron for a while but I finally figured it out. When I initially connect the FTDI cable to a monochron that is powered on the screen goes blank for a few seconds. I have to hit enter on the avrdude command while the screen is black or else I will get the error you are getting.
jmsunseri
 
Posts: 9
Joined: Mon Mar 01, 2010 1:34 pm

Re: Bootloading Monochron

by adafruit on Mon Mar 15, 2010 11:30 am

thats right, the bootloader has a timeout!

adafruit
 
Posts: 12151
Joined: Thu Apr 06, 2006 4:21 pm
Location: nyc

Please be positive and constructive with your questions and comments.