I'm putting together 3 ice clocks but I haven't gotten around to flashing the at168's yet. I noticed that when testing the boost converter voltage according to the build page I don't have what I should, does the programming on the 168 need to be in place for the boost converter to work?
The initial low-voltage buzz test didn't work either, and I assumed that one was related to the unflashed IC's and kept going...
help?
Ice Clock Build - tests with unflashed atmega
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
- figgyb
- Posts: 41
- Joined: Wed Mar 17, 2010 5:19 pm
Re: Ice Clock Build - tests with unflashed atmega
Well, I went ahead and did the obvious thing... flashed the 168... and now all is good
- len17
- Posts: 394
- Joined: Sat Mar 14, 2009 7:20 pm
Re: Ice Clock Build - tests with unflashed atmega
Check out the Ice Tube "design" page to see why.figgyb wrote:Well, I went ahead and did the obvious thing... flashed the 168... and now all is good
Please be positive and constructive with your questions and comments.