Hello,
Do you have a kit, or can you advise me how to assemble your parts for a project?
I would like to make a battery-operated alarm clock & use a vibration motor, not a buzzer.
So this would slide under the pillow and not disturb anyone else nearby.
I'm a beginner, so, please something to give me practice.
Thank you
Elliott
Need a clock kit, vibratory motor no buzzer & cool
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
- Baltimore
- Posts: 1
- Joined: Mon Aug 19, 2019 11:53 am
- adafruit_support_bill
- Posts: 88087
- Joined: Sat Feb 07, 2009 10:11 am
Re: Need a clock kit, vibratory motor no buzzer & cool
We have a few clock kits that could be adapted to drive a vibrator motor: https://www.adafruit.com/?q=clock%20kit
There are also a lot of clock projects in our Learning System: https://learn.adafruit.com/search?q=clock
Depending on the design of the clock you start with, it could be as simple as wiring the motor in place of the buzzer.
https://www.adafruit.com/product/1201
Others may require some additional circuitry and/or code. But we can help you out on that when you get to that point.
There are also a lot of clock projects in our Learning System: https://learn.adafruit.com/search?q=clock
Depending on the design of the clock you start with, it could be as simple as wiring the motor in place of the buzzer.
https://www.adafruit.com/product/1201
Others may require some additional circuitry and/or code. But we can help you out on that when you get to that point.
Please be positive and constructive with your questions and comments.