Tube IV-18
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
- Aztlanpz
- Posts: 3
- Joined: Sat Jul 11, 2015 11:32 am
Tube IV-18
Did I cut the leads to short can it be salvage help
- Attachments
-
- image.jpg (55.09 KiB) Viewed 880 times
- adafruit_support_bill
- Posts: 88096
- Joined: Sat Feb 07, 2009 10:11 am
Re: Tube IV-18
That looks a little on the short-side, but probably still workable for the Ice-Tube clock.
- Aztlanpz
- Posts: 3
- Joined: Sat Jul 11, 2015 11:32 am
Re: Tube IV-18
Any tips how to use it as an ice clock
- adafruit_support_bill
- Posts: 88096
- Joined: Sat Feb 07, 2009 10:11 am
Re: Tube IV-18
Do you have the kit?
- adafruit_support_bill
- Posts: 88096
- Joined: Sat Feb 07, 2009 10:11 am
Re: Tube IV-18
Just follow the instructions then. https://learn.adafruit.com/ice-tube-clo ... ly#step-51
As you can see in the photo below, the tube sits fairly close to the board, so the leads do not need to be super long for proper assembly.
As you can see in the photo below, the tube sits fairly close to the board, so the leads do not need to be super long for proper assembly.
Please be positive and constructive with your questions and comments.