SMT-to-DIP Breakout 2.54mm Pitch

Chat about pick and place machines, reflow ovens, assembly techniques and other SMT tips & trix

Moderators: adafruit_support_bill, adafruit

Please be positive and constructive with your questions and comments.
Locked
User avatar
cc_0914
 
Posts: 1
Joined: Thu Oct 20, 2016 10:06 am

SMT-to-DIP Breakout 2.54mm Pitch

Post by cc_0914 »

I'm looking for a board to convert a 2.54mm pitch SMT sensor to DIP for breadboard prototyping.


It seems only 1.27mm and 0.65mm pitch boards are available though. What are the pad sizes for these pitches?


Are there breakout board options for 2.54mm pitch smts?

User avatar
adafruit_support_mike
 
Posts: 67391
Joined: Thu Feb 11, 2010 2:51 pm

Re: SMT-to-DIP Breakout 2.54mm Pitch

Post by adafruit_support_mike »

2.54mm pitch is also 0.1", so the pins will line up with a Perma-Proto or pad-per-hole board:

https://www.adafruit.com/categories/466
https://www.adafruit.com/products/2670

I'm afraid we don't have any dedicated breakouts for that size though.

Locked
Please be positive and constructive with your questions and comments.

Return to “SMT (Surface Mount Tech)”