Hi linus
did you see the new My200 ?
PNP line for small manufacutring.
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
-
- Posts: 41
- Joined: Sun Aug 12, 2012 6:32 pm
Re: PNP line for small manufacutring.
Hi
see, yes, touch/use/demo, no. See my last post! Looks pretty much the same as the others, think only new camera/head, should be faster and more acurate, though.
Cheers
Linus
see, yes, touch/use/demo, no. See my last post! Looks pretty much the same as the others, think only new camera/head, should be faster and more acurate, though.
Cheers
Linus
- alphatronique
- Posts: 231
- Joined: Fri Jun 25, 2010 8:30 am
Re: PNP line for small manufacutring.
Hi
yes that suc... it paint itself in the corner whit that mentality
and that wly enve in if love it machine will never buy one new or refurb from it
ok maybe start program in a job on the live display boot may not good idea by i have a demo van trailer that may use for this during the show ..
i not sure about mechatronica many of it machine look bit home made
but if you not yet look it take a time to look TWS quadra
and finally i knot some one that have a essemtec ,that not to bad ,but still lime many programin was pain ,thing that this is the point easy to programming
yes that suc... it paint itself in the corner whit that mentality
and that wly enve in if love it machine will never buy one new or refurb from it
ok maybe start program in a job on the live display boot may not good idea by i have a demo van trailer that may use for this during the show ..
i not sure about mechatronica many of it machine look bit home made
but if you not yet look it take a time to look TWS quadra
and finally i knot some one that have a essemtec ,that not to bad ,but still lime many programin was pain ,thing that this is the point easy to programming
-
- Posts: 41
- Joined: Sun Aug 12, 2012 6:32 pm
Re: PNP line for small manufacutring.
Hey
a friend runs a ems company, having 5 mydata lines and my500. But even he came across same observation as I did. Thing here is, I understand that the pnp maybe really is a good solution, Sparkfun got one recently, but to me, I want to see the full picture, other machines are maybe better here or there and by not providing you a demo they draw them away from the table. The other companies do demo their solutions to you.
I had a quick look at TWS - the most homemade looking solution I have ever seen But DIMA could be a catch, they have same offering, go to their demo center and bring your board/parts...
Linus
a friend runs a ems company, having 5 mydata lines and my500. But even he came across same observation as I did. Thing here is, I understand that the pnp maybe really is a good solution, Sparkfun got one recently, but to me, I want to see the full picture, other machines are maybe better here or there and by not providing you a demo they draw them away from the table. The other companies do demo their solutions to you.
I had a quick look at TWS - the most homemade looking solution I have ever seen But DIMA could be a catch, they have same offering, go to their demo center and bring your board/parts...
Linus
- alphatronique
- Posts: 231
- Joined: Fri Jun 25, 2010 8:30 am
Re: PNP line for small manufacutring.
Hi linus
yup TWS was also proud of it home made looking
it tell on it website that i build it in house for fit it need and trun into commercial stuff
but of all of smaller home mame machine it one that look more good
and not build whit 80/20 structural aluminium
some of older mechatronica look funny to but newer look good
was curious it it make it or it rebrand it , torch in china have similar model
bit like manncorp that just rebrand many china model (torch , mdc ,dima etc )
yup TWS was also proud of it home made looking
it tell on it website that i build it in house for fit it need and trun into commercial stuff
but of all of smaller home mame machine it one that look more good
and not build whit 80/20 structural aluminium
some of older mechatronica look funny to but newer look good
was curious it it make it or it rebrand it , torch in china have similar model
bit like manncorp that just rebrand many china model (torch , mdc ,dima etc )
-
- Posts: 10
- Joined: Wed Jul 14, 2010 8:44 am
Re: PNP line for small manufacutring.
Interesting thread. I was in a similar position to some extent. I wanted to avoid outsourcing boards as I was interested in getting some new 'toys' The volumes were low enough I could get away with it. Running a simple APS40LEV, manual screen printer (but decent quality) and a batch reflow oven. Now the gloss has worn off and I've been a little more successful than I first planned and all of the manual loading etc. gets to be a pain. A few interesting thoughts; If using panalised boards a manual screen printer can easily keep up with even a fast PnP machine, so leave the auto/semi auto screen printer until later if you can. The problem I have is that for a decent sized panel it can take the PnP around 20 minutes to complete - it only took me about a minute to load & print the paste. The batch oven can also easily out-pace my current PnP. If I get too far in front of the printer the paste can start to dry out a little so I tend to print maybe 10 panels, and then clean the printer off and leave the next batch for another day. The smaller 'non-production' machines are good, but even loading the boards becomes a chore, so I'm looking at upgrading the PnP next year (space is a problem so that is being addressed first). There's no way I could justify a new fast PnP machine so I've been looking around for used ones. The 2nd hand market for this type of gear in Australia is pretty much non-existent so I'll be most likely importing a used machine. At the moment I'm considering either Mydata or Europlacer machines. Mydata has better representation in Aust. and the option is also available to buy an older model unit from the local Mydata rep. The specs for the different machines are not very different so it's a hard choice (there's currently no Europlacer gear in Oz which makes it more of an unknown). AOI would be nice but the current commercial units are quite expensive and so far I've gotten away with a home-rolled version (can handle missing components and a few other things but not much more at this point). If I'd know that it would work out, I'd have considered getting a used faster PnP to start with rather than a new slow one - 20/20 hindsight
- tonnyneoden
- Posts: 9
- Joined: Thu Sep 26, 2013 4:36 am
Re: PNP line for small manufacutring.
Neoden tech Co.,Ltd. is a factory who is specializing in the manufacture and export of desktop automatic PICK AND PLACE MACHINE (SMT MACHINE) for more than four years. They are the leaders in this technology in China and have got a good reputation in this field .Their machines are famous for stable running ,high precision & speed ,light-weight and easy operation ,which also help win high praises from clients .
For electronic enthusiasts who wants to do research or those who only have little budget but want to plan start small business, it's a good choice as its low price.
There is a video connect link http://www.youtube.com/user/NeoDentech for their machines.
For electronic enthusiasts who wants to do research or those who only have little budget but want to plan start small business, it's a good choice as its low price.
There is a video connect link http://www.youtube.com/user/NeoDentech for their machines.
-
- Posts: 2
- Joined: Thu Nov 28, 2013 9:30 am
Re: PNP line for small manufacutring.
Please consider M10V P&P machine too at http://www.mechatronika.com.pl/content/ ... 4/lang,en/
and corresponding short movie
and corresponding short movie
-
- Posts: 164
- Joined: Fri Jun 11, 2010 9:21 pm
Re: PNP line for small manufacutring.
M10V looks good, but why did they put the camera on the wrong side?dariusz wrote:Please consider M10V P&P machine too at http://www.mechatronika.com.pl/content/ ... 4/lang,en/
and corresponding short movie
If you need to use bottom vision (no flying cam), then the camera should be next to the tape feeders as these will be used the most.
Maybe the feeder sides can be swapped?
Anyone have prices?
-
- Posts: 2
- Joined: Thu Nov 28, 2013 9:30 am
Re: PNP line for small manufacutring.
You can fix two tape feeder cessettes on the machine - one on the left side, one on the right side - as on the movie. From this point of view there is no matter where camera is.
Cheers
Dariusz
Cheers
Dariusz
- tonnyneoden
- Posts: 9
- Joined: Thu Sep 26, 2013 4:36 am
Re: PNP line for small manufacutring.
TM4120V(NeoDen4-with internal rails)with cameras, the brand new and long awaited model of NeoDen, is a desktop Pick and Place machine with vision system.
As a professional PnP machine designer and developer, NeoDen has been doing research in SMT industry from 2010.
NeoDen4 is with dual cameras, auto rails, auto electronic feeders and 4 placement heads, which could help to handle 0201,
BGA, QFN and 0.8m/1.2m/1.5m LED strip. NeoDen4 is the best choice to satisfy all demands of high precision, high capacity, stable performance and low cost. This is a huge breakthrough not only for NeoDen,but also for small and medium-sized enterprises, those who want to improve placement accuracy and speed up PCB assembly with a limited budget.
Can view more videos via below link:
https://www.youtube.com/channel/UCe5Fja ... shelf_id=0
Contact NeoDen Technology for more details:
Skype:tonny-neoden [email protected]
As a professional PnP machine designer and developer, NeoDen has been doing research in SMT industry from 2010.
NeoDen4 is with dual cameras, auto rails, auto electronic feeders and 4 placement heads, which could help to handle 0201,
BGA, QFN and 0.8m/1.2m/1.5m LED strip. NeoDen4 is the best choice to satisfy all demands of high precision, high capacity, stable performance and low cost. This is a huge breakthrough not only for NeoDen,but also for small and medium-sized enterprises, those who want to improve placement accuracy and speed up PCB assembly with a limited budget.
Can view more videos via below link:
https://www.youtube.com/channel/UCe5Fja ... shelf_id=0
Contact NeoDen Technology for more details:
Skype:tonny-neoden [email protected]
Please be positive and constructive with your questions and comments.