Black Lives Matter - Action and Equality. ... Adafruit is open and shipping.
0

stick vise
Moderators: adafruit_support_bill, adafruit

Please be positive and constructive with your questions and comments.

stick vise

by sekramer10 on Thu Sep 15, 2016 5:50 pm

why, oh but why... why does the stick vise not have a flat on the rod such that the clamps will not spin and flop about as one attempts to place the board and use the device?

sekramer10
 
Posts: 164
Joined: Wed Oct 28, 2015 12:42 am

Re: stick vise

by adafruit_support_bill on Thu Sep 15, 2016 6:32 pm

I just set mine flat on the bench while inserting the board.

adafruit_support_bill
 
Posts: 77951
Joined: Sat Feb 07, 2009 10:11 am

Re: stick vise

by sekramer10 on Sat Sep 17, 2016 12:03 pm

Another suggestion for improvement - the rod should not be conductive! A Teflon coating? A sturdy design otherwise.

sekramer10
 
Posts: 164
Joined: Wed Oct 28, 2015 12:42 am

Re: stick vise

by adafruit_support_bill on Sat Sep 17, 2016 8:04 pm

Thanks for the suggestion. We don't manufacture these ourselves, but we can pass along the suggestion.

adafruit_support_bill
 
Posts: 77951
Joined: Sat Feb 07, 2009 10:11 am

Re: stick vise

by adafruit2 on Sun Sep 18, 2016 4:59 pm

please send suggestions to http://www.stickvise.com/#about
thakn you!

adafruit2
Site Admin
 
Posts: 19225
Joined: Fri Mar 11, 2005 7:36 pm

Please be positive and constructive with your questions and comments.