Hello,
What is the Flute length of the 0.5mm PCB drill?
https://www.adafruit.com/product/2118
Thanks
Adam
Adafruit 0.5mm PCB drill
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
- adafruit_support_mike
- Posts: 67485
- Joined: Thu Feb 11, 2010 2:51 pm
Re: Adafruit 0.5mm PCB drill
The nominal length is 0.25" There's about +/-0.020" of normal variation though.
- AsmithW
- Posts: 3
- Joined: Mon Sep 24, 2018 12:31 am
Re: Adafruit 0.5mm PCB drill
Thanks,
do you happen to know if they are a 1 piece construction or if the drill portion is soldered in place?
do you happen to know if they are a 1 piece construction or if the drill portion is soldered in place?
- adafruit_support_mike
- Posts: 67485
- Joined: Thu Feb 11, 2010 2:51 pm
Re: Adafruit 0.5mm PCB drill
They're solid. Trying to solder/weld anything that small would destroy its temper.
- AsmithW
- Posts: 3
- Joined: Mon Sep 24, 2018 12:31 am
Re: Adafruit 0.5mm PCB drill
Cool,
I wouldn't have asked the question until I had a company refuse modifying the shank on the grounds the drill tips were soldered into the shank.
I wouldn't have asked the question until I had a company refuse modifying the shank on the grounds the drill tips were soldered into the shank.
- adafruit_support_mike
- Posts: 67485
- Joined: Thu Feb 11, 2010 2:51 pm
Re: Adafruit 0.5mm PCB drill
Hmm.. I've never come across that before.
These are solid though.
These are solid though.
Please be positive and constructive with your questions and comments.