0

Non linearity problem
Moderators: adafruit_support_bill, adafruit

Please be positive and constructive with your questions and comments.

Non linearity problem

by Stamos on Tue Jun 27, 2017 3:58 pm

Hello I find a problem here

i measure 0-2.51volts (small steps)
I made a 2:1 voltage divider to save the ads1115.
First i made this voltage divider on 5.6ohm resistor and i started to measure some values (normal factor is 3.03)

in low Values the factor is totaly different than 3.03... and until 1V the values started to drop 3.5 , 3.12 blah blah until 1V it got 3.04 (its ok) until 2.51 factor was good!

what should i do here, i should close this project at last!!! do i need to find an equation for this thing?
Attachments
5.jpg
5.jpg (92.82 KiB) Viewed 98 times

Stamos
 
Posts: 24
Joined: Wed Jun 21, 2017 8:51 am

Re: Non linearity problem

by adafruit_support_bill on Tue Jun 27, 2017 4:19 pm

Please don't double post. You already have a thread on this topic.

adafruit_support_bill
 
Posts: 74337
Joined: Sat Feb 07, 2009 10:11 am

Please be positive and constructive with your questions and comments.