๐Ÿ“ฃ๐Ÿ“ช ๐Ÿšš Adafruit will not be shipping USPS orders Monday October 14, 2019 ๐Ÿ—“. Expedited USPS orders placed after 11am ET ๐Ÿ•š Friday October 11 will go out Tuesday October 15 ๐Ÿ“ฃ๐Ÿ“ช๐Ÿšš
0

Non linearity problem
Moderators: adafruit_support_bill, adafruit

Please be positive and constructive with your questions and comments.

Non linearity problem

by Stamos on Tue Jun 27, 2017 3:58 pm

Hello I find a problem here

i measure 0-2.51volts (small steps)
I made a 2:1 voltage divider to save the ads1115.
First i made this voltage divider on 5.6ohm resistor and i started to measure some values (normal factor is 3.03)

in low Values the factor is totaly different than 3.03... and until 1V the values started to drop 3.5 , 3.12 blah blah until 1V it got 3.04 (its ok) until 2.51 factor was good!

what should i do here, i should close this project at last!!! do i need to find an equation for this thing?
Attachments
5.jpg
5.jpg (92.82 KiB) Viewed 101 times

Stamos
 
Posts: 24
Joined: Wed Jun 21, 2017 8:51 am

Re: Non linearity problem

by adafruit_support_bill on Tue Jun 27, 2017 4:19 pm

Please don't double post. You already have a thread on this topic.

adafruit_support_bill
 
Posts: 74600
Joined: Sat Feb 07, 2009 10:11 am

Please be positive and constructive with your questions and comments.