📬❄️📦Adafruit Holiday Shipping Deadlines 2019: Please place all UPS 3 Day orders by 11am ET Friday December 13 📬❄️📦
0

SSD1309 OLED driver board schematic
Moderators: adafruit_support_bill, adafruit

Please be positive and constructive with your questions and comments.

SSD1309 OLED driver board schematic

by marijan on Tue Oct 24, 2017 9:21 am

Hi,
recently I bought this display http://export.farnell.com/midas/mcot128 ... dp/2342681 for the purpose of project, and I have hard time trying to make him work.
I'm using Rpi 3 and I2C bus. I connected all using datasheet file and it doesn't work. Recently I saw that Adafruit had almost the same display in sale https://learn.adafruit.com/2-3-monochro ... e/overview
I connected OLED display using this schematic from datasheet
schematic.png
schematic.png (33.2 KiB) Viewed 992 times

Can you help me with providing Adafruit schematic for driver board.
Thanks.

marijan
 
Posts: 1
Joined: Tue Oct 24, 2017 9:04 am

Re: SSD1309 OLED driver board schematic

by franklin97355 on Tue Oct 24, 2017 2:04 pm

Sorry, we can't help you with someone else's display. You might get some help from the maker or the seller.

franklin97355
 
Posts: 21362
Joined: Mon Apr 21, 2008 2:33 pm
Location: Lacomb, OR.

Re: SSD1309 OLED driver board schematic

by RES on Tue Oct 24, 2017 2:33 pm

Display you bought has a parallel bus (controller: SSD1309) Page 5 of the datasheet shows how to connect the display (8-bit parallel bus), need a few capacitors.
http://www.farnell.com/datasheets/2051145.pdf
Find a serial to parallel converter (breakout) board; I2C to SSD1309, if one exist, because I cannot find one so quickly.

RES
 
Posts: 5
Joined: Sat May 02, 2015 2:53 pm

Please be positive and constructive with your questions and comments.