i everybody so now i can fully explain my hardware to you guys
arduino nano
Turnigy 500mAh 2S 20C
Addicore 5V 1.5A Positive Voltage Regulator
Analog Feedback Servo
NEMA-11 Bipolar Gearless Stepper Motor
Optical Rotary Encoder HKT22
allegro A4988
Rotary encoder
Ground - Thick Black
Index - Green (Not Supported on HKT22)
A Channel - Black
+5V DC - Red
B Channel - White
i would really appreciate if you guys gave me some help and pointers
also here is the project page: http://samy.pl/combobreaker/
Lottie: re: show and tell
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
- Lottiebot
- Posts: 1
- Joined: Wed Mar 16, 2016 7:54 pm
Lottie: re: show and tell
- Attachments
-
- 687474703a2f2f73616d792e706c2f636f6d626f627265616b65722f73494d475f323837352e4a5047.jpg (131.82 KiB) Viewed 349 times
- camrex
- Posts: 23
- Joined: Wed Oct 07, 2015 1:27 pm
Re: Lottie: re: show and tell
Here is a Fritzing diagram based on what I could ascertain from his code, and the datasheets for the components he used.
NOTE: This is UNTESTED! Use at your own risk. I do not have the parts to test this.
Good luck!
NOTE: This is UNTESTED! Use at your own risk. I do not have the parts to test this.
Good luck!
- Attachments
-
- Fritzing_LockBreaker_bb.png (373.9 KiB) Viewed 312 times
Please be positive and constructive with your questions and comments.