0

hello all
Moderators: adafruit_support_bill, adafruit

Please be positive and constructive with your questions and comments.

hello all

by LGHustle on Thu Aug 05, 2021 3:13 am

Quick Question. What other parts hardware would i need to get my Pimoroni Inky pHAT - 3 Color eInk Display?

LGHustle
 
Posts: 6
Joined: Thu Aug 05, 2021 2:31 am

Re: hello all

by mikeysklar on Thu Aug 05, 2021 5:37 pm

@LGHustle,

Primarily you need a Raspberry Pi.

Supported Models: Raspberry Pi 3 B+, 3, 2, B+, A+, Zero, and Zero W


The Pi itself will often require an SD card and USB micro-B power cable for power. A wall based micro-b power supply could also be used. This is what I would go with.

https://www.adafruit.com/product/3400
https://www.adafruit.com/product/1995
https://www.adafruit.com/product/2693
https://www.adafruit.com/product/939

mikeysklar
 
Posts: 5576
Joined: Mon Aug 01, 2016 8:10 pm

Please be positive and constructive with your questions and comments.