0

sk6812mini
Moderators: adafruit_support_bill, adafruit

Please be positive and constructive with your questions and comments.

sk6812mini

by wkk2 on Tue Aug 16, 2016 9:15 pm

Is there a recommended PCB footprint for the sk6812mini? The data sheet lacks details.

wkk2
 
Posts: 2
Joined: Tue Aug 09, 2016 4:25 pm

Re: sk6812mini

by adafruit2 on Thu Aug 18, 2016 5:08 pm

yah the datasheets are somewhat minimal - you can use extract-lbr from eagle to grab our footprint out of
https://github.com/adafruit/Adafruit-Ne ... erWing-PCB
or just 'DIY' it yourself, its 3.5mm square - we just guessed too :D

adafruit2
Site Admin
 
Posts: 18053
Joined: Fri Mar 11, 2005 7:36 pm

Re: sk6812mini

by LukeSpencer on Sun Feb 17, 2019 4:24 pm

Hi - when placing a component could someone confirm the which foot was ground.

The picture on page three of the document https://cdn-shop.adafruit.com/product-files/2686/SK6812MINI_REV.01-1-2.pdf doesn't specify the orientation of the image displaying the pads.

Just wanted to clarify before attaching.

Cheers

LukeSpencer
 
Posts: 1
Joined: Sun Feb 17, 2019 4:21 pm

Please be positive and constructive with your questions and comments.