Hi Guys,
I have a 32 x 32 RGB LED Display and RGB Matrix Hat with Real Time clock.
I am missing 2 colours in the whole of the top right quarter (only displays red in top right 16X16 section).
I am wondering if this is a fault in display, Hat, or my soldering of Hat headers. (and how I might tell?)
Thanks for any input.
A quarter of LED matrix missing 2 colours
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
- adafruit_support_rick
- Posts: 35092
- Joined: Tue Mar 15, 2011 11:42 am
Re: A quarter of LED matrix missing 2 colours
post some pictures of your soldering. Also, it may be a flaky ribbon cable connector. If you put the connector on a work table, holes down, and gentry tap on the top with a hammer, it will help seat the pins.
Please be positive and constructive with your questions and comments.