0

16x32 RGB Matrix done as an LED wall is unresponsive.
Moderators: adafruit_support_bill, adafruit

Please be positive and constructive with your questions and comments.

16x32 RGB Matrix done as an LED wall is unresponsive.

by Copia117 on Wed Jan 09, 2019 3:12 pm

Hey,

So we're trying to hook up a bunch of these 16x32 Matrix together for a show like how the DIY LED wall project does. They're wired in two rows of twelve hooked up to the Receiver cards used in the project, in inputs 1&2, run over ethernet to the sender card, which then connects to a pc over usb for panel control using LED Studio. The DVI driver is a macbook pro for media. All connections nice and clean, plenty of power to go around.

The problem we're experiencing at this point is the wall will be on a random color layout, and after following the setup for LED Studio it'll affect the wall by changing the pattern or forcing static but won't work as a display. We've tried using the CON files from the 96 x 96 setup and just increasing the pixel width and height also, but still experiences different types of static. Any ideas on what could be the problem?

Copia117
 
Posts: 1
Joined: Wed Jan 09, 2019 3:00 pm

Please be positive and constructive with your questions and comments.