0

PiOLED Not working at all
Moderators: adafruit_support_bill, adafruit

Please be positive and constructive with your questions and comments.

Re: PiOLED Not working at all

by crashmoon on Sat Dec 28, 2019 4:55 am

aphexx0407 wrote:Run the command ls /dev/i2c* /dev/spi*

You should get a response /dev/i2c-1 /dev/spidev0.0 /dev/spidev0.1

Also make sure you install the Python libraries


Yep, please see all 4 commands and their output in my screenshot. This command came back with the correct output.

I have also rebooted the Pi multiple times, checked that the stats.py is running and it is (see screenshot below) the process comes up twice because I've set it to start at boot and I manually started it as root to see if that worked but still nothing.
Attachments
statsdotpy.png
statsdotpy.png (144.66 KiB) Viewed 69 times
Last edited by crashmoon on Sat Dec 28, 2019 5:20 am, edited 1 time in total.

crashmoon
 
Posts: 7
Joined: Sat Dec 28, 2019 2:08 am

Re: PiOLED Not working at all

by crashmoon on Sat Dec 28, 2019 5:00 am

just for clarity, and being on a new page now:

Also I have a static IP set for the Pi and have set my routers DNS to the same as the Pi's IP address. Like I said initially, the Pi-hole works fine, just no stats (no anything) on my Oled screen
Attachments
PiOLED_setup.png
PiOLED_setup.png (60.78 KiB) Viewed 69 times

crashmoon
 
Posts: 7
Joined: Sat Dec 28, 2019 2:08 am

Re: PiOLED Not working at all

by aphexx0407 on Sat Dec 28, 2019 5:33 am

That's odd, so maybe it is. Have you reseated the PiOLED to the bieard as well?

aphexx0407
 
Posts: 37
Joined: Tue Sep 10, 2019 1:41 am

Re: PiOLED Not working at all

by crashmoon on Sat Dec 28, 2019 5:51 am

aphexx0407 wrote:That's odd, so maybe it is. Have you reseated the PiOLED to the bieard as well?

It actually looks like the screen is cracked at the top near the connection

:(
Attachments
pioledscreencrack.jpeg
pioledscreencrack.jpeg (424.73 KiB) Viewed 63 times

crashmoon
 
Posts: 7
Joined: Sat Dec 28, 2019 2:08 am

Re: PiOLED Not working at all

by aphexx0407 on Sat Dec 28, 2019 6:24 am

It does, contact aftersales support. They'd be more than happy to settle that for you

aphexx0407
 
Posts: 37
Joined: Tue Sep 10, 2019 1:41 am

Re: PiOLED Not working at all

by crashmoon on Sat Dec 28, 2019 7:04 am

aphexx0407 wrote:It does, contact aftersales support. They'd be more than happy to settle that for you


Willl do. Thanks for your help anyway :)

crashmoon
 
Posts: 7
Joined: Sat Dec 28, 2019 2:08 am

Re: PiOLED Not working at all

by adafruit_support_carter on Sat Dec 28, 2019 7:26 pm

@crashmoon It would also help if you could start a new thread for your issue. If support has already taken care of you, then no worries. But in general, it's best to always start a new thread for any new issue.

adafruit_support_carter
 
Posts: 14453
Joined: Tue Nov 29, 2016 2:45 pm

Please be positive and constructive with your questions and comments.