Hi.
I got my Snake Eyes kit delivered recently, the bonnet, cables and 2x 240*240pixel IPS TFT screens, hooked up to my Raspberry Pi 3, 16GB SD. I was following this guide:
https://learn.adafruit.com/animated-sna ... i/overview
After initial build and install it boots, and on my HDMI connected screen I see the two creepy eyes (success)! However, I only see an eye on the left LCD screen (also see boot text on this screen only during boot, but I suspected that was working as designed).
The backlights come on for both, so the right hand screen is getting something. I swapped the LCDs over, and could get an image on the other screen, so I know the LCDs are OK. I checked the cabling, and it looks OK. This led me to think the issue was one of my solders, so my next task is to get my multimeter on those.
Can anyone recommend any tests, diagnostics or logs I can be checking to try to fix this?
(Hoping to deploy this as part of a Halloween animatronic in front of the house.)