🎁📬❄️📦Adafruit Holiday Shipping Deadlines 2019: Please place all UPS 2 Day orders by 11am Monday, December 16 📦❄️📬🎁
0

Adafruit 2.7" Tri-Color eInk / ePaper Shield
Moderators: adafruit_support_bill, adafruit

Please be positive and constructive with your questions and comments.

Adafruit 2.7" Tri-Color eInk / ePaper Shield

by jrwdlw on Sun Nov 24, 2019 11:30 pm

I purchased an Adafruit 2.7" Tri-Color eInk / ePaper Shield with SRAM, product ID 4229. It's the one that includes the five buttons at the bottom . I'm trying to use the display with an Arduino Nano. I've looked at the "Adafruit eInk Display Breakouts" document located at https://learn.adafruit.com/adafruit-ein ... -breakouts. The problem is, that document does not show pin labels for my particular board. The other boards shown in that document have a different pin configuration (13 pins), verses my board, which has 18 pins at the top, and 14 at the bottom. Some of the pins are labeled on the board, but the remainder are not. Is there a schematic (or labeled picture) available for this board?

Thanks,
John

jrwdlw
 
Posts: 2
Joined: Sun Nov 24, 2019 11:15 pm

Re: Adafruit 2.7" Tri-Color eInk / ePaper Shield

by jrwdlw on Mon Nov 25, 2019 1:16 am

Big oversight on my part. I just realized that this display is intended to plug directly into the Metro M4 board. Also, those Metro M4 pins are labeled very clearly!

jrwdlw
 
Posts: 2
Joined: Sun Nov 24, 2019 11:15 pm

Please be positive and constructive with your questions and comments.